Calcium Aluminate Coating and Lubrication for Aluminum Cold Extrusion
Surface preparation is an essential part of aluminum cold extrusion. The interface between the blank and the tooling must accommodate substantial deformation while controlling friction and preventing aluminum pickup.
For its cold backward extrusion project, TDB Hanoi is using a calcium aluminate conversion coating combined with a lubricant.
Understanding the separate functions of these two elements helps production teams control the process correctly.
What is a calcium aluminate conversion coating?
In this application, calcium aluminate is a conversion coating formed on the aluminum surface. It provides a carrier layer for the lubrication system used during forming.
Chemetall’s technical literature describes a cold extrusion treatment route for high-strength aluminum alloys that includes surface preparation, calcium aluminate conversion coating, lubrication, and drying.
The appropriate description is calcium aluminate conversion coating followed by lubrication. The process should not automatically be described as phosphating, because the coating chemistry is different.
Why is an additional lubricant needed?
The conversion coating and the lubricant perform complementary functions.
| Element | Main function |
|---|---|
| Calcium aluminate conversion coating | Provides a carrier layer for the lubrication system |
| Forming lubricant | Controls friction and helps limit direct contact between aluminum and tooling |
| Material heat treatment, when required | Establishes the material condition needed for forming |
The coating and lubricant must be selected as a compatible system. Suitability depends on the alloy, component geometry, forming conditions, and downstream requirements.
A surface that feels slippery before pressing does not necessarily provide adequate lubrication under forming pressure.
Lubrication does not soften the blank
Surface treatment addresses the contact conditions between the blank and the tooling. It does not replace a material softening treatment.
A well-lubricated blank can still be difficult to form if its material condition is unsuitable for the required deformation.
Material condition and lubrication should therefore be evaluated separately before assessing how they work together.
Understanding the treatment sequence
A general process framework is:
Blank inspection → Cleaning and surface preparation → Conversion coating → Lubricant application → Drying as specified → Storage and transfer to forming.
This framework is educational. The actual sequence, including any rinsing, activation, or neutralization stages, must follow the approved instructions for the selected chemical system.
Temperature, concentration, treatment time, and acceptance limits should come from the supplier’s technical documentation and process validation.
What should be controlled?
| Stage | Suggested control records |
|---|---|
| Incoming blanks | Material identification, batch number, dimensions, and surface condition |
| Cleaning | Treatment conditions and cleanliness acceptance criteria |
| Conversion coating | Chemical identification, bath controls, and specified coating checks |
| Lubrication | Product identification, application conditions, and specified coverage or coating quantity |
| Drying and storage | Drying conditions, handling method, and storage time |
| Forming | Traceability between the treated blank batch and the production batch |
Evaluate performance during production
Visual inspection can help identify uneven coverage or contamination. It cannot establish forming performance on its own.
Process validation should also examine forming load, surface defects, aluminum pickup, and stripping behavior.
The practical lesson is straightforward: manage calcium aluminate treatment and lubrication as a controlled manufacturing operation, with documented conditions, acceptance criteria, and batch traceability.
